No problem. I've seen so much injector model numbers being thrown around without much proof, or specs written down. At least this way individuals will know a direct replacement without second guessing. Now, I know the yellow/orange Volvo injectors work but digging around deeper and just looking through the Bosch catalogue I've stumbled across the 0 280 156 161. These are
12 hole EV6
E type injector used in Jeeps and some Ford models. They use a USCAR type plug vs a jetronic, but adapters are easily attainable. I'm curious if these would work... they have a lower resistance (12.00 ohm) and higher flow rate (172.00g at 3 bar; our system would limit it anyways right?). They might be worth looking into, maybe when building a stroker...
I'm still fresh to the game so I'm not too sure; just food for thought. Attached show injector spec, body type and bosch nomenclature/connector types.