pan will come off if you unbolt the motor mounts and lift it up, pull it out towards the front and your gonna have to wiggle around/maneuver it alot, when your going to put the pan back the easiest way to get the gasket up there is to take some really thin mechanics wire and tie it through the corner bolt holes, start a few bolts loose then just pull the wire out __________________ ^being rebuilt^ until then: daily car: 96' Blue DASC'd ti with koni coilovers slowly progressing... weekend car: 85 1/2' 944 Porsche no a/c, p/s, gutted cat, loud as hell exhaust, loud as hell sound system |