318ti.org forum - View Single Post - Has anybody modified ASC software to keep abs but delete traction control?

John Firestone · 03-09-2018, 06:31 PM

Turning off the ASC with ignition-on was not an unknown mode some years ago.

I think the simplest way was to generate a pulse with a resistor capacitor pair: tie one side of the capacitor to 12V, one side of the resistor to ground, and the other sides of both to each other and to the ABS/ASC controller's ASC switch input.

03-09-2018, 06:31 PM	#7
John Firestone Senior Member Join Date: Nov 2004 Location: Bremerhaven, Germany Posts: 977 iTrader: (0) Photo Gallery	Turning off the ASC with ignition-on was not an unknown mode some years ago. I think the simplest way was to generate a pulse with a resistor capacitor pair: tie one side of the capacitor to 12V, one side of the resistor to ground, and the other sides of both to each other and to the ABS/ASC controller's ASC switch input.