MISC For Sale - DASC parts, Engine parts, old headlights, etc Engine related: BMW M44 coil pack + wires + covers in fair shape $50 for it all - I went to COP at about 100k miles. PO had records indicating the wires were replaced at around 70k miles, but I wouldnt put too much faith into it, as I think he was scammed by the mechanics that he took the car to, but either way - it worked great when I pulled it. Water Pump with a metal impeller (cast iron?) - $30 less than 1000 miles on it Stock Sachs clutch fan for older models, M42 and M44 - $40, less than 1k miles Mechanical fan - $30 < 1k miles on it, I bought it brand new, OEM unit (more expensive one) Fan Shroud - $15, one of the mounting tabs was broken off, but I repaired and reinforced it. BMW M44/E36 mech tensioner with bad bearing - $10 Headlights: DJ Auto Passenger side headlight with angel eyes (just one) - $40 Pair of lights from my TI - one is in fair shape, other (pass. side) is in bad shape - $20 for the pair, they all have hi/low bulbs in there still, both are pitted. Pair of headlights from my M3 - good shape, all bulbs included, both are pitted. - $40 for the pair Bumpers: 2 M3 bumpers, both need repairs, both are arctic silver, $100 each. One has a bottom surface that needs work, no splits/cracks, and the other is cracked horizontally where the license plate trim goes. Bumper shocks - $15 each Bumper reinforcement plate - $40 Other stuff: Blitzsafe CD Player adapter for all E36, E46 OEM radios with no DSP - $50 Soundgate ABMW35V5 - Alpine CD Changer interface to BMW OEM Headunit - $40 All prices are OBO (obviously), let me know if you are interested in anything specific, or if I am completely off with my prices on something. I have a stock 3.45 open diff that I need to get rid of, a pair of E30 stock diff flanges, a bunch of M42 related DASC hardware and stuff (pulley plate (one that mounts 2 pulleys for an M42), pulleys (in the process of crapping out), intake elbow for M42 DASC, hoses, RRFPRs (2 of them), ICV for an M42 (2-pin), etc etc..) Or maybe I can trade with someone if you actually like anything on this list THAT much, I am mostly looking for a decent exhaust (not too loud, but more free flowing), euro steering wheel (dreamin), knowledge on how to make custom silicone hoses, or where to get one that has a slight 's' shape that offsets the intake from a stock TB to a 3" MAF... Or maybe something else - let me know either way. Oh and id rather not ship, but if you really want something let me know. Im in NORCAL. Cheers, Artem |