Quote:
Originally Posted by KSKarl That's a cold start issue. <speaking to Jeremy> Check the temp sensor, at least clean its connector. Then check for air leaks. This assumes it starts/runs OK when it's warmed up. Look through a couple other threads on hard starting for more info. |
Hi Karl, thanks for the reply.
Yep, when it's warmed up, it will start & run without a problem - I only get this when it's been left to stand for a few hours.
As far as air leaks - are you talking of vacuum leaks? I just had a vacuum leak fixed after noticing a whistling under the bonnet whenever it was running. I couldn't tell you where now though..
I'll clean the temp sensor as soon as I find it and report back!
Thanks mate.
Doug
Just a quick addition, by Temp Sensor, I assume you mean number 15 in this diagram..
Thanks..