Sorry for the late reply guys. School got in the way and I stopped driving the car until I did the coolant rebuild. I just finished putting my engine back together.. I'm in the process of bleeding the system now. When my friend was getting out of the car she accidentally hit the accelerator and coolant spewed out of my bleed screw. That caught my attention. I closed my bleeder screw and had her hold onto the gas at 1500RPM and bubbles were coming up from the reservoir tank. So my question.. did I do too little too late and my HG is blown? No smoke from the back No milky substance on my oil cap I know there's still air in my system since my heater isn't working. I've only done one round of bleeding. |