humm... the led on the dash is not NECESSARY to run the alarm That's just an indicator. I have parted several cars out and sometimes i cannot get the led and I have installed the alarms with success. Now, your remote is a 3 button or a 2 button. Let me look for the programming instructions on the round 2 button remote. I will post them. It is simple. But before you go on doing all that.... Make sure they didn't take out the Alarm module, and that the harness is plugged in underneath the pass. side dash., ALSO, please remove the battery negative terminal for 20 min or so, make sure all windows are up and all doors unlocked. That worked for me once. |