Quote: Originally Posted by jetblackbimmer I blew out my head gasket........Im just curious on how much this should cost. The quotes I have vary by thousands. Any help would be great. How easy would it be to fix it myself? also, how much would I be looking at if I did it myself? | The one worry I have for performing a DIY on head gaskets is that whether the cylinder head itself will be fine to re-install. Depending on how bad the car overheated, sometimes the head may warp, in which case machining might be involved or buying a used one (cheaper). This happened with my 86 merkur turbo; I ended up machining the head, but had to use 2 gaskets as the head was trimmed and the compression went up, which is a not good for a Turbocharged car. Make sure you do the research. __________________ It's always a great day to be underwater and play with the fish.....preserve our oceans and reefs" Fariz 1997 318ti, Hellrot (Bright Red), Dinan Stage 2 Chip 16x7 OEM sport Wheels/X-Brace/Custom Strut Brace/Cold Air Intake/M-Tec Steering Wheel/Koni Adjustable FrontShocks/ Bilstein Sport Rear Shocks /H&R Sport Springs/Custom fabricated strut tower brace/Rear Strut brace, Stromung Exhaust Future Mods: E46 17" wheels or Kosei K-1 17x8.5s |