just stick a butter knife in the top part and pry slowly until you can fit your fingers behind it. Then take the knife and slowly move it down the side.
There are 3 clips that pop into metal holders taht are in the actual frame you just need to pop them out. Chances are you WILL break some of the tabs but you just need to super glue or jb weld them back on (make sure their straight) Feels like its going to break but the tabs are really just stuck in tight
and you cant just peel it off without looking terrible its not black plastic its off white. Theres a top layer that can easily be pulled off then another one taht is glued on pretty strongly. I redid my a pillars in a different fabric and i just took off the loose top layer than used adhesive and stuck the new material on the solid layer |