I have the getrag bolted up to my M52, I kept the stock ti driveshaft but I think it's really pushing it, there isn't much more room to compress it. With a ZF you'll definitely need the front half of a 328/M3 driveshaft and balance it with the ti rear half. I think if you have a 198mm selector rod already that it should work with the ZF. UUC/AKG list the same selector rod for late 325i and 328i/M3. __________________ ~Dave~ 98 328ti Morea Grun slicktop 11 128i space gray slicktop 13 JGC WK2 Deep Cherry Search | RealOEM |