Thread: rally car build
View Single Post
Old 03-17-2017, 11:56 PM   #3
jerseytim
Member
 
Join Date: Jun 2016
Location: jersey
Posts: 74
Vehicles
iTrader: (0)
Default

removing the wiring is taking ages, all the unnecessary wires have been removed from inside the car and i have started in the fuse box now. shouldn't take long to finish. one thing i found was after removing lots of wires the starter no longer worked so i had to join 2 wires on the ews box and the engine worked as it should, the rev counter is not working and the speedometer, rev counter, fuel gauge and water temp randomly go to full then slowly return to normal. i will look into that if it still happens when the wiring is finished.
next job is to remove the fuel tank, replace the diff and start cleaning up where the cage plates are going to be welded
jerseytim is offline   Reply With Quote