Quote:
Originally Posted by wolferj  I was thinking backwards on the engine harness/body harness...
Since your ti is a manual, no need to worry. If you were doing the trans swap as well, then the car's General body module (ECU) would be looking for a trans and trans DME and throw errors. But you don't need to worry about that, you will just have a extra spot on the harness for a connection to the Trans stuff you won't use.
. |
Hey James, I have a question about this. I'm researching my swap and this is the first I've seen of the body ECU caring about the transmission type. I thought that if going from auto to manual and the engine DME were from manual, all is good in the world. Is that not the case?
Thanks.