View Single Post
Old 11-07-2011, 06:19 PM   #9
familytruckster
Senior Member
 
Join Date: Jul 2009
Location: MD/PA/DC
Posts: 1,629
Vehicles
iTrader: (3)
Default

If the DME does not see a signal from the cam and crank sensor it will not run the fuel pump or fire the injectors. Hence the dry plugs.

How about you toss a code reader on it and see what it says.

here is what the insulation in the cam and crank sensors look like probably look like....

__________________
No more ti.
familytruckster is offline   Reply With Quote