318ti.org forum - View Single Post

**cooljess76** · 08-13-2011, 02:07 AM

I think Josh aka "thesk8nmidget" used 318 as a side number. As for the door moldings, mine were rotted too(Michigan car). There was literally rust stains dripping down the doors from the metal brackets inside the moldings. Anyway, rip the metal out of the moldings and glue them on with 3M windo-weld. Just put a small dab on each end and a another every 10 or so inches in between. That stuff is awesome. It dries rubbery, sticks to painted surfaces and heck it's used to glue windshield in place, it ain't comin off unless you take it off.

08-13-2011, 02:07 AM	#11
cooljess76 NOBODY F's with the Jesus Join Date: Oct 2006 Location: Ventura California Posts: 7,824 iTrader: (6) Photo Gallery	I think Josh aka "thesk8nmidget" used 318 as a side number. As for the door moldings, mine were rotted too(Michigan car). There was literally rust stains dripping down the doors from the metal brackets inside the moldings. Anyway, rip the metal out of the moldings and glue them on with 3M windo-weld. Just put a small dab on each end and a another every 10 or so inches in between. That stuff is awesome. It dries rubbery, sticks to painted surfaces and heck it's used to glue windshield in place, it ain't comin off unless you take it off.