View Single Post
Old 12-17-2016, 01:41 AM   #5
ZEK
Senior Member
 
ZEK's Avatar
 
Join Date: Jul 2009
Location: US
Posts: 315
Vehicles
iTrader: (0)
Default

Quote:
Originally Posted by Strawman View Post
Great swap! How is the vibration level with the E36 M3 motor mounts and poly transmission mounts? I have stock E36 M3 motor mounts and E46 M3 transmission mounts; had to remove the red poly trans mounts because it buzzed like hell in my S52-swapped car. I am interested in hearing about the difference between E36 and E46 motor mounts.
With stock E46M3 mounts the vibration is not bad at all. I had them on the M44 as well. I wouldn't even say there is much of a difference if any. The trans mounts being UUC black are the lowest tier on their solid mounts. They are ok for DD but around 3K there can be noticeable vibration. I would still run them though personally. If I had the means to easy replace the stock rubber bushings as soon as they got soft I would just stay stock rubber all around. Just because it's still a daily.
__________________
98 318Ti S52
84 318i M10 Zender
93 325is Parker
ZEK is offline   Reply With Quote