318ti.org forum - View Single Post

**xxxJohnBoyxxx** · 06-23-2009, 04:01 AM

[B]ONLY MINOR THINGS MISSING BEFORE INSTALL[B]

I will receive my OBX manifold Wednesday and turbo blanket tomorrow. I'm going to stick with the DME I currently have until I get her running on the turbo. I should be stable to 20psi on the DME

Here are some more pictures:

Part from Friday delivery. Take special note to the Fast and Furious BOV

Turbo. Completely dis-assembiled by me and reconfigured then put back together. Ebay special

Waste Gate 44mm. Good quality. Some please tell me what that is in the left bottom corner cause I can't figure it out.

06-23-2009, 04:01 AM	#35
xxxJohnBoyxxx Senior Member Join Date: Dec 2007 Location: Gulfport, Florida Posts: 3,208 iTrader: (1) Photo Gallery	[B]ONLY MINOR THINGS MISSING BEFORE INSTALL[B] I will receive my OBX manifold Wednesday and turbo blanket tomorrow. I'm going to stick with the DME I currently have until I get her running on the turbo. I should be stable to 20psi on the DME Here are some more pictures: Part from Friday delivery. Take special note to the Fast and Furious BOV Turbo. Completely dis-assembiled by me and reconfigured then put back together. Ebay special Waste Gate 44mm. Good quality. Some please tell me what that is in the left bottom corner cause I can't figure it out.