Easy way to reinforce your shock towers so they don't tear, especially if you have after market shocks and springs. Super easy install, just take off the two tower nuts lay these plates over the holes and put the nuts back on.
__________________ ~Dave~
98 328ti Morea Grun slicktop 11 128i space gray slicktop 13 JGC WK2 Deep Cherry
Did the rouge mounts come with their own re-inforcement plate? I have the TcKline rear monoball mounts, and I still used the reinforcement plates to make sure the top of the sheet metal didn't rip. I did have to ask TcKline to put longer bolts on the shock mount so that I was able to put the plate it.
I also had to drill out the holes on the reinforcement plate slightly.