Help! : Dual Vanos e36 swap ~ Wiring! Hey everyone I have done some searching and I am not sure of the answer. I have a m52tu from a 2000 323ci (e46) that I want to swap into my 318ti. I know that the 323ci basically has the same tranny so it bolts right up, motor mounts bolt right up, so physical fitment is not a issue. Wiring is what I am worried about! Goal is to have it completely stock swap(DME,intake,exhaust, harness etc) so that I can go and get it ref'd and legal. Do I need to do something with the cluster to get it work? Swap the whole wire harness with the stock DME and its plug and play ?? I am not to knowledgeable with wiring so I am not ever sure what I need to worry about. I just know that by 2000 its like OBDII + or something different then OBDII and dual vanos is different too. Help! ~ I don't want to be doing the swap and get completely stumped! Thanks. __________________ ***328ti Build thread. *** Even more important: SUPPORT 318ti.org! CLICK THE LINK ABOVE! Hosting a forum like this is not free. 318ti.org is one of the best BMW forums on the web because it is member supported, not vendor supported. The cost to become a Supporter is a nominal $10.00... A YEAR! DO IT! NOW! |