bought a set of the gen5 DEPO's (I have had good experience with DEPO's on mercedes w124's in the past). Initial impressions are that they are of good quality (access door seals are good), I'm sure not as good as the ZKW, BOSCH etc but they look like they will work well for years. One comment for anyone else that picks up a set - the instruction drawing that comes with them leaves a bit to be desired. It shows picking up a hot lead on both sides for the angel eyes, but they also include a relay harness that actually powers the angel eyes. You only need to pull a + from one side marker (or the switch of your choice) to actuate the relay and power both lights. There is a post on bimmerforums that has a diagram, I commented there as well. I did not measure it, does anyone know the current the angel eyes pull that would require a relay harness?
Initially I plan to just run the H7 bulbs that came with them. Not sure if I will swap in HID's for the low beams at some point (like VVME or similar).
Paul | 
Linear Mode
