Oil cooler on M44

[cooljess76]

Originally Posted by lpcapital

IIRC on the M42 (or some of them) the check valve is built into the plate, while on M44 is plastic and removable/replaceable...

You're right. Looking at the pic, his does appear to be built in. I fixed an oil filter housing leak on my old '95 clubsport and it had a plastic check valve.

[silver]

i have try 2 take it out, but it sems like it´s in 1 pece..
so i must get the M44 one.

[silver]

Originally Posted by cooljess76

You're right. Looking at the pic, his does appear to be built in. I fixed an oil filter housing leak on my old '95 clubsport and it had a plastic check valve.

Hmm... my car is are 318TI Compact ´95 er..
this engine i have try the Mocal plate on is my ekstra engine but it´s from are older E30..

so maybe my own engine has this plastik check valve, i wil look on that in the weekendt.

but thanks for help

[lpcapital]

Originally Posted by silver

Hmm... my car is are 318TI Compact ´95 er..
this engine i have try the Mocal plate on is my ekstra engine but it´s from are older E30..

so maybe my own engine has this plastik check valve, i wil look on that in the weekendt.

but thanks for help

It might, but I wouldn't reuse it: it tends to deform and the o-rings dry so it might not give you a tight oil fit.

[silver]

Originally Posted by lpcapital

It might, but I wouldn't reuse it: it tends to deform and the o-rings dry so it might not give you a tight oil fit.

You right.. it better 2 bye a new. i wil do that.