3.45 LSD Wanted

[Budget M3]

I really like the stock ratio, but want LS for the track. I know I can use almost any E30 diff, but I'm lazy and don't have the time to fiddle with modding the half shafts, too. I don't check the board too often, so email is best: BudgetM3@yahoo.com

Thanks!

[L84THSKY]

Read my thread.

http://www.318ti.org/forum/showthrea...t=11529&page=3

Originally Posted by Budget M3

I really like the stock ratio, but want LS for the track. I know I can use almost any E30 diff, but I'm lazy and don't have the time to fiddle with modding the half shafts, too. I don't check the board too often, so email is best: BudgetM3@yahoo.com

Thanks!

[1996 328ti]

Originally Posted by Budget M3

I really like the stock ratio, but want LS for the track. I know I can use almost any E30 diff, but I'm lazy and don't have the time to fiddle with modding the half shafts, too. I don't check the board too often, so email is best: BudgetM3@yahoo.com

Thanks!

If you are tracking the car, get the bigger diff. My original 3.45 LSD lastest a couple years before needing to be rebuilt. I ended up going with the larger housing. Actually I went for a Quaife. $$$ but a lifetime warranty.

[Budget M3]

L8--Appreciate the info. I did read your thread...sounds like a more involved job than I want to do myself. I am looking for a quick "plug'n'play" solution.

Stephen--good advice as always...if a quick solution is not in the cards and I pay someone else to do the job due to time constraints, I will definitely look into the Quaife.

Soooo.....anyone have any good leads on a 3.45 LSD?

[Budget M3]

^^^