Hey everyone,
first off I just got a great deal on an M50 from a guy on bimmerforums, it is from a 92 325(non-vanos). and I will be putting it into my 95 ti. It came with the engine, tranny, and ecu/harness. I know I'm going to need to get a gauge cluster, radiator and front springs from the 325(I already have upgraded bilstein shocks for the 318 which I've noticed are the same part# for all e36's). So here are my questions
-what else will I need to complete this swap?
-am I going to have to do anything with the driveshaft and differential or will I be ok with what is on the car right now?
-when I'm switching the gauge cluster is there going to be any problems with the wiring or is it just a matter of switching the 2 clusters around?
-and finally what do you guys suggest for an exhaust? I was looking at getting a UUC system-U exhaust and just taking it in and having a muffler shop fit it to the 325 cat. Is this a good idea or no?
sorry for all the questions i just wanna make sure I have everything figured out before I get started with this. and all of your help will be appreciated
Thanks
Greg