Anyone using Turner Motorsport E46 M3 Rear Spoiler ??

[ti4me]

Hi All, Anyone using the Turner Motorsport E46 M3 rear spoiler in Cabor Fiber?? It looks pretty nice and seems like the mounting "feet" should fit on the ti rear hatch with a little - - - drilling... Anyone have pic's? Thanks! Jon (ti4me)

Here is the link to TMS site:

http://www.turnermotorsport.com/html...ID=E46M3CFWING

[tiFreak]

http://www.318ti.org/forum/showthrea...t=23031&page=2

http://www.318ti.org/forum/showthread.php?t=21780

[elchicano]

Search is your friend, my friend.

[1CivetDei2]

o god...

[ti4me]

Thanks for the info on the pic's. I do not like the mounting feet too much - but the wing seems like it would provide good down-force (which is the key). I may consider it since the car will be mostly on the track. Good looks are nice, but want it mainly for the down-force. Thanks All.. ti4me (Jon)

[tiFreak]

both of them have the mounting feet put on wrong, they don't look bad when they're mounted right

[spidertri]

If you want down force why not get a high rise M3 wing? Check out J!m and Dan I's cars, they both have the wings installed. I seem to recall that the ti won't benefit much from such a low wing, the wing needs to be higher than the roof line to get the cleanest air possible.

http://www.318ti.org/forum/showthread.php?t=23516

A lot of good info on page 3.
http://www.318ti.org/forum/showthrea...ar+wing&page=3

[ti4me]

thanx!! I will check into these.. :-)