I knew my intake boot needed to be replaced. It was tearing at the clamp where it is secured to the MAF. $26 from Pelican parts and a week waiting and I was able to replace it and all the green Electrical tape I was using as a temporary hold.
this one I knew about
: As you can see, it is torn about 9/10s all the way around.
After pulling the boot and replaceing it.. I found this one: Which explains why that particular hose kept trying to come undone.
As I undid the other clamp, I found this one:
And then finally, While wrestling with the hose to get it off of the throttlebody, I put my fingers through another hole:
Since replacing the boot, the car has never run so well