You're on the right track. Off the top of my head, remove AC belt, 10mm allen and ~15mm socket. Use a 15 or 16mm socket to turn the other belt tensioner to slacken the belt and take it off. Remove rubber intake elbow from throttle body. Take off end of throttle cable. Unplug vacuum lines from charger, fuel pressure regulator etc. Take out 2 bolts on fuel rail, pull it out with all 4 injectors hanging from it, and lay it towards the back of the engine bay. 5 nuts on intake manifold, 2 bolts on front bracket, one on lower bracket that goes straight down from the blower to the engine mount. Lift the whole assembly out as one. That should be most of it. |