Hello,
I recently picked up some m-tech parts from a local pick and pull. After doing some research now I found that the cars with metal side skirts stock need the holes drilled to attach the plastic side skirts. Car is a being used for track purposes and the sides skirts are in rough shape already, but i would still like to attach them correctly if I can. sadly the previous owner didn't want to buy the right clips so they used several screws. At least the rear bumper is in great shape.
It looks like I will need to either eye ball the holes or find a person with the discontinued jigs I could either borrow or buy. If anyone has them and is located along the eastern US coast let me know. I go back and forth between North Carolina and New Jersey frequently.
This is the thread where I saw the jigs being used:
http://www.318ti.org/forum/showthrea...ew+side+skirts This is the real oem link for the jigs
https://www.realoem.com/bmw/enUS/sho...diagId=51_2761 Any help would be appreciated.
plastic side skirt jig 
Threaded Mode