BMW E36 3G EWS Programming info

[p.dooley]

Please see attached for Alarm programming info.

Hope this helps folks. If there are any problems please drop me a line.

[andrewk9]

Do you know how I can reprogram the alarm to switch off the "panic button" feature on the key fobs?

Thanks

Andrew.

[thesk8nmidget]

if you have a 96+ ti then you hold button 1 and 2 for 3 seconds

[andrewk9]

That didn't work. Not sure which button is button 1 or 2 though - is that trick perhaps for the factory fitted alarm? Mine is a 3G EWS which I'm told is a dealer retrofit. Any ideas?

Andrew.

[tiFreak]

Originally Posted by andrewk9

That didn't work. Not sure which button is button 1 or 2 though - is that trick perhaps for the factory fitted alarm? Mine is a 3G EWS which I'm told is a dealer retrofit. Any ideas?

Andrew.

if you have a 3-button keyfob, the top is 1, the middle is 2, the bottom is 3

[andrewk9]

Nope - mine is 2 button - the same one pictured in the PDF linked above - one grey button, one red button on a seperate key fob, not build into the key itself (the key has a push-button BMW logo that activates an orange light to help you see so you can insert it into the door lock in the dark).

[tiFreak]

oh, my bad, I thought this was for the 3-button remote

[thesk8nmidget]

i was at work and we dont have pdf so i thought you meant the stock 2 button.

sorry for the misunderstanding.

hopefully someone else can help