S52 pistons for M44 and M44 crank

[dinno246]

I have a set of 5 S52 pistons that were prepared for use in the M44 engine with the M44 crankshaft. The pistons were decked and the valve pockets were opened alittle to clear the valves. They have a bore of 86.4mm weigh 303 grams and come with lightweight pins and rings. I also have a very good M44 stock crank that I would like to sell with the pistons. I am asking 300.00 for the of pistons and the crank but If you only want the pistons let me know. email me at dsmith873@msn.com

[dinno246]

some one make me an offer.

[mischief]

picture would help

[mphmotorwerks]

What upgrade does this offer??? more power??

[dinno246]

I'll get some pictures up today. This is a displacment increase since the S52 pistons measure 86.4mm and the M44 is 85mm bore. this would get you 1958cc of displacment or a 2.0 liter engine. and the compresion ratio is 10.5:1 with the stock head gasket, so there would be an increase in compression as well. The crankshaft is stock but the counterweights have been cleaned up to remove some of the casting debris.

[dinno246]

Its on ebay if you want it.

[cev12]

Did you sell them?