M44 P/S Pump Fit S52?

[Hawkster]

Will my stock P/s pump off the M44 in the Ti fit the S52 engine? I know that the lines aren't the same... but I'm looking for a quick fix, as the pump from the S52 is bent. Any insight here?

[Panzer_M]

iIRC no

I was told also the 97 P/S pump won't work with the 95 M42.

so I am going to have to bone out 300 for one prob later this summer.

Going to replace the Alt, waterpump and p/s since all are over 100k in wear now.



Keep it in shape is hard, but worth it.

[andy]

The question is, what does 'work' mean. I think you can get them to fit if you borrow the bracket from the original unit. The ti (at least M42 pump, not sure about the M44) pump isn't as high pressure as the M52 pump, but should still work better than nothing.

[Hawkster]

Thanks for your help guys.... unfortunately for me... I didn't check this post until about 3 hours after I ordered a new S52 pump lol. Oh well