318ti.org forum

Go Back   318ti.org forum > Technical, Maintenance and Modifications > Knowledge Base

Notices

Knowledge Base How to articles and things explained.

.
» Recent Threads
New 318ti Member-...
09-10-2018 11:01 PM
Last post by batmite
Today 09:32 AM
3 Comments, 318 Views
96 - 5 Speed - Green -...
08-01-2018 06:52 PM
Last post by batmite
Today 09:28 AM
2 Comments, 740 Views
Euro glass headlights
09-24-2014 10:27 PM
Last post by paul somlo
Today 08:38 AM
210 Comments, 119,540 Views
WTB: M trim, rear
Today 08:35 AM
Last post by Columbo
Today 08:35 AM
0 Comments, 2 Views
OEM roof spoiler
06-14-2018 12:19 AM
Last post by Platanos
Yesterday 09:22 AM
9 Comments, 2,115 Views
1996 318ti Part Out
09-13-2018 07:43 PM
Last post by Locus7
09-17-2018 06:13 AM
2 Comments, 421 Views
1996 BMW 318TI E36 -...
09-13-2018 05:55 PM
Last post by Locus7
09-16-2018 04:28 AM
1 Comments, 396 Views
WTB: OEM Rear mudflaps...
09-15-2018 12:54 PM
Last post by SonomaGTLN2
09-15-2018 12:54 PM
0 Comments, 221 Views
Hard Motorsport Fender...
07-12-2018 09:09 PM
Last post by Estii
09-13-2018 10:22 PM
2 Comments, 898 Views
NEED TO BUY M44 ICV...
09-13-2018 10:02 PM
Last post by Estii
09-13-2018 10:02 PM
0 Comments, 206 Views
Comment Share/Bookmark
 
Tutorial Tools Display Modes
HOW TO: Replace the Guibo
HOW TO: Replace the Guibo
Published by cali-ti
12-20-2005
Default HOW TO: Replace the Guibo

Article originated from, resides on and is provided by www.pelicanparts.com
http://www.pelicanparts.com/BMW/tech.../E36-Guibo.htm
Tutorial Tools

  #1  
By CirrusSR22 on 11-20-2007, 07:16 AM
Default

Does anyone know if the exhaust needs to be dropped on the 318ti to change the guibo? On bf.c, it sounds like some people are getting it done without taking off the exhaust. Z3 guys mainly? Just wondering if it's possible for us, as I haven't had a chance to get under the car recently.

EDIT: I just got under my car and it looks like the guibo bolts are accesible without taking the exhaust off. The vibration damper on the transmission crossmember should probably come off, but that's just one simple bolt. Hopefully the driveshaft will push back far enough to get the guibo out.

Mine has some cracks, but it's not too terrible. I'll do a write-up in the spring.
Reply With Quote
  #2  
By BMW_318TI on 12-22-2007, 03:11 PM
Default

I have replaced the guibo, you don't have to remove the exhaust to replace it.
Just loosing the six guibo bolts.

But replacing driveshaft bearing you have to remove the catalystor.
Reply With Quote
  #3  
By tiFreak on 01-18-2008, 10:10 PM
Default

what's a guibo and what does it do?
Reply With Quote
  #4  
By cosmos schwarz on 01-18-2008, 10:26 PM
Default

its a rubber donut at the front of the drive/propshaft. it dampens the shockwaves caused by the gearbox changing gear.
Reply With Quote
  #5  
By CirrusSR22 on 04-16-2008, 12:57 AM
Default

I just replaced my guibo today. I didn't have to remove the exhaust, but it didn't come out as easy as I thought it would. I had to yank out (literally) the heat shield above the exhaust to access the center bearing and remove its two nuts. I also had to take the four bolts off the cross brace that sits just aft of the center bearing. Removing this brace and unbolting the center bearing allowed the drive shaft to flex down enough to pull the guibo out.

Unfortunately the slight clunking I was getting when I let off the throttle at low speeds still is there. The drivetrain does seem more solid now though; just feels like a bit less slack.
Reply With Quote
  #6  
By fieldhb on 11-08-2008, 07:40 PM
Default

How do you know if you need the Guibo replaced if you can't get under your car ?
Noise when shifting gears and disengaging the clutch ?
If so, how does it sound ? feel ?
Reply With Quote
  #7  
By BMW_318TI on 11-08-2008, 08:07 PM
Default

Shaking when accelerating.
Reply With Quote
  #8  
By dougie on 12-23-2008, 01:08 AM
Default

Does anyone have a diagram or can you tell ne how to route a serpentine belt on the m44?
Reply With Quote
  #9  
By 95EurOLoVin318ti on 02-13-2009, 04:20 PM
Default

I DID MY COUSINS
Reply With Quote
  #10  
By 95EurOLoVin318ti on 02-13-2009, 04:21 PM
Default

in his 325ic and it was a nightmare and it breaks again the same day come to find out the guy at bav auto gave the wrong part we had to drop everything out of this car pain
Reply With Quote
  #11  
By R111S on 05-11-2009, 01:57 AM
Default

I've recently added the Curt Mfg Trailer Hitch and decided to change the Guibo too...glad I did, it was cracked/dry. I did not remove the exhaust or vibration damper. I unbolted the heat shield (4 screws) and slid it as far rearward as possible...I too was tempted to rip it out of the way but resisted that urge successfully. The driveshaft slid back just barely far enough to slide the Guibo out.

The 6 Guibo bolts were not of the same age...the 3 on the trans side were shiny...the 3 on the driveshaft side were rusty. I suspect the engine/trans was removed recently by the previous owner...maybe cooling system work?
Reply With Quote
  #12  
By mnguyen84 on 06-14-2018, 07:26 PM
Default



is this a guibo? this is what my car has and it fell a part. I'm trying to get an understanding of how it installs on top the shaft before I attempt it.
Reply With Quote
Comment

Bookmarks


Currently Active Users Viewing This Tutorial: 1 (0 members and 1 guests)
 
Tutorial Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Tutorial Tutorial Starter Category Comments Last Post
One reason for Limited Slip hatchgrafix Differentials 22 10-26-2008 09:16 PM
Another reason not to street race elchicano Lounge 11 08-16-2008 12:29 PM
any reason to replace tensioner? cali-ti Maintenance 10 04-01-2005 12:52 AM
The OWNED Thread got closed !!!LOOK!!! TiPerformance General Chit Chat 11 11-20-2004 07:46 AM


All times are GMT +1. The time now is 10:05 AM.


.
Powered by site supporters
vBulletin Version 3.8.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2018, 318ti.org

Tutorial powered by GARS 2.1.8m ©2005-2006
© vBadvanced CMPS v3.2.2
[page compression: 80.23 k/107.82 k (25.59%)]

318ti.org does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information or products discussed.