318ti.org forum

Go Back   318ti.org forum > Technical, Maintenance and Modifications > Suspension

Notices

Suspension Springs, sway bars, shocks.

.
» Recent Threads
M50+manual swap bastard...
03-01-2024 10:00 PM
Last post by Andy318
Yesterday 02:34 PM
3 Replies, 47,980 Views
Cali Top owners: How...
07-14-2014 04:29 PM
Last post by Trusted-1
03-15-2024 02:37 AM
2 Replies, 44,950 Views
FOR SALE: 82k mile 1995...
03-15-2024 01:24 AM
Last post by di318
03-15-2024 01:24 AM
0 Replies, 40,595 Views
BMW E36 Compact rear...
03-13-2024 12:56 PM
Last post by BMW Welsh rally
03-13-2024 12:56 PM
0 Replies, 51,437 Views
WTB: 318ti with...
04-20-2022 08:57 AM
Last post by di318
03-10-2024 08:08 PM
21 Replies, 248,687 Views
The 318ti OBD-II engine...
10-19-2006 06:48 PM
Last post by Cybersid13
03-09-2024 02:12 PM
209 Replies, 681,961 Views
Reply Share/Bookmark
 
Thread Tools Display Modes
Old 11-12-2015, 04:07 PM   #1
Mathieu
Junior Member
 
Join Date: Sep 2014
Location: CA
Posts: 8
Vehicles
iTrader: (0)
Default Rear sub frame urethane bushing

97 318ti with 200k miles

Looking for brand recommendations for a non-squeaking urethane bushing with a softer (daily driving use) vibration (75A?). Also, since labor is up to 90% the cost of this service what else should I look to take care of while the differential, etc, is out? In other words, is it worth it to do the differential mount and rear trailing arms as well even if they are in decent condition.

My plan is to keep the car for five years and I bought it 18 months ago.

Last edited by Mathieu; 11-12-2015 at 06:53 PM. Reason: incomplete information
Mathieu is offline   Reply With Quote
Old 11-12-2015, 09:19 PM   #2
Biolite
Senior Member
 
Join Date: Jun 2003
Location: MD
Posts: 126
iTrader: (0)
Default

I've been running Powerflex street bushings in my subframe for a few years now and have been happy with them. No squeaking, just make sure to apply a liberal amount of the grease they supply. I'd do the RTABs as well while they're out. Diff, maybe. I did, but it seems easy enough to get to at some other point if it's in decent shape now.
__________________
'96 318ti Base - few mods installed...
Biolite is offline   Reply With Quote
Old 11-12-2015, 09:35 PM   #3
1996 328ti
Senior Member
 
1996 328ti's Avatar
 
Join Date: Jun 2003
Location: Greenville, SC
Posts: 9,356
Vehicles
iTrader: (1)
Default

STOCK!
__________________
...steven
BMW CCA #146825
1996 BMW 328ti • 2003 MINI Cooper S • 2016 M235i
www.bmwcca.org
1996 328ti is offline   Reply With Quote
Old 11-12-2015, 11:33 PM   #4
Mathieu
Junior Member
 
Join Date: Sep 2014
Location: CA
Posts: 8
Vehicles
iTrader: (0)
Default

Yeah, I'll do the RTABs and the diff probably too as I don't know it's condition, it will be an upgrade, it will be cost effective, and I can forget about it.

Thanks for the feedback on Powerflex.

Anybody out there use Revshift? They're almost half the cost but the low profile is a concern.
Mathieu is offline   Reply With Quote
Old 12-17-2015, 09:11 PM   #5
MN-318ti
Junior Member
 
MN-318ti's Avatar
 
Join Date: Jan 2015
Location: Duluth, MN
Posts: 20
iTrader: (0)
Default

I'm about to put some AKG Motorsports Street/ Race bushings in with an LSD swap. I'll let you know my initial thoughts

Sent from my SM-N920V using Tapatalk
__________________
Blitzing backroads on the shores of Lake Superior.
MN-318ti is offline   Reply With Quote
Old 12-18-2015, 01:20 AM   #6
Mathieu
Junior Member
 
Join Date: Sep 2014
Location: CA
Posts: 8
Vehicles
iTrader: (0)
Default

Thanks
Mathieu is offline   Reply With Quote
Old 12-18-2015, 02:57 AM   #7
wolferj-RIP
Senior Member
 
wolferj-RIP's Avatar
 
Join Date: Jul 2007
Location: norcal - 94590
Posts: 3,186
iTrader: (16)
Default

Unless you are seriously tracking your car, OE bushings are just fine. If you want to upgrade, get OE bushings for an M-coupe.
__________________
James 95 active w/leather interior and sport interior conversion, Vaders, full M-Tech exterior conversion. Now m50 swapped* Eibach sway bars, D2 Coilovers, Depo's w/AE's, blacked-out sides and grills, LeatherZ console and door armrests, 1 series starter button mod, and custom finished Style 5's <--- in this color! Named "Roddy": *M50 6 cyl. swap with fan delete, S50 cams and chip, AFE stage 2 intake, M3 clutch and 11.5 lb Fidanza flywheel, 3.15LSD, battery relocated to rear and complete custom exhaust. Sweet! 97 318ti sport, Alaska Blue, Contours, coilovers, Dove Vaders and custom black/grey interior named "Max" 95 318ti Active in Cosmos, S50 swap in progress... named "Pit" SUPPORT 318ti.org! CLICK THE LINK ABOVE! Hosting a forum like this is not free. 318ti.org is one of the best BMW forums on the web because it is member supported, not vendor supported. The cost to become a Supporter is a nominal $10.00... A YEAR! DO IT! NOW!
wolferj-RIP is offline   Reply With Quote
Old 12-18-2015, 06:27 AM   #8
Mathieu
Junior Member
 
Join Date: Sep 2014
Location: CA
Posts: 8
Vehicles
iTrader: (0)
Default

Unless you are seriously tracking your car, OE bushings are just fine. If you want to upgrade, get OE bushings for an M-coupe.

*

The problem with OE's is that I'll be kicking myself down the road if I throw another $1K plus for a manufacturer's planned obsolescence when I could've resolved it for posterity while improving the handling.

Are the M-coupe's comparably priced?
Mathieu is offline   Reply With Quote
Old 12-19-2015, 12:04 AM   #9
ZEK
Senior Member
 
ZEK's Avatar
 
Join Date: Jul 2009
Location: US
Posts: 315
Vehicles
iTrader: (0)
Default

Last week did subframe and RTAB with Ireland Engineering urethane. Did without any of the proper tools and left trailing arms on car. Was a complete pita but did it. What tools do you have? Get the AKG bushing removal tool, it's $35 or make your own. There is a noticeable increase in noise and handling. If you want quiet get stock. Only reason I changed to urethane is for motor swap.
__________________
98 318Ti S52
84 318i M10 Zender
93 325is Parker
ZEK is offline   Reply With Quote
Old 12-19-2015, 06:13 AM   #10
wolferj-RIP
Senior Member
 
wolferj-RIP's Avatar
 
Join Date: Jul 2007
Location: norcal - 94590
Posts: 3,186
iTrader: (16)
Default

Quote:
Originally Posted by Mathieu View Post
Unless you are seriously tracking your car, OE bushings are just fine. If you want to upgrade, get OE bushings for an M-coupe.

*

The problem with OE's is that I'll be kicking myself down the road if I throw another $1K plus for a manufacturer's planned obsolescence when I could've resolved it for posterity while improving the handling.

Are the M-coupe's comparably priced?
Yes, the m-coupe bushings are very reasonable. I've been tracking for 2 years with those and they are fine...

A serious point to make is that if you are going to upgrade the bushings on one of the rear suspension components, you should do them all with comparable bushings... i.e., don't just do the subframe bushings, do the RTABS and Diff with something similar... Otherwise you end up putting undue stress on other components..
__________________
James 95 active w/leather interior and sport interior conversion, Vaders, full M-Tech exterior conversion. Now m50 swapped* Eibach sway bars, D2 Coilovers, Depo's w/AE's, blacked-out sides and grills, LeatherZ console and door armrests, 1 series starter button mod, and custom finished Style 5's <--- in this color! Named "Roddy": *M50 6 cyl. swap with fan delete, S50 cams and chip, AFE stage 2 intake, M3 clutch and 11.5 lb Fidanza flywheel, 3.15LSD, battery relocated to rear and complete custom exhaust. Sweet! 97 318ti sport, Alaska Blue, Contours, coilovers, Dove Vaders and custom black/grey interior named "Max" 95 318ti Active in Cosmos, S50 swap in progress... named "Pit" SUPPORT 318ti.org! CLICK THE LINK ABOVE! Hosting a forum like this is not free. 318ti.org is one of the best BMW forums on the web because it is member supported, not vendor supported. The cost to become a Supporter is a nominal $10.00... A YEAR! DO IT! NOW!
wolferj-RIP is offline   Reply With Quote
Old 12-19-2015, 05:43 PM   #11
ptbowman
Junior Member
 
Join Date: Dec 2015
Location: Pittsburgh
Posts: 13
Vehicles
iTrader: (0)
Default

I did a 1988 325iX rear-suspension rebuild last winter: it is absolutely identical to the 318ti rear suspension. I went with PowerFlex subframe bushings, Trailing Arm Bushings, and a Rear Diff Bushing. I dropped the entire rear subframe, rolled it out, and then cleaned painted everything and replaced the bushings.

I do not believe that the noise/vibration/harshness has deteriorated at all, but I do realize that can be very subjective with some people having a more sensitive ear than others.

The biggest challenge we had was that the OEM subframe bushings were absolutely corroded into the body due to 27 years and 150,000 miles of driving in salty environments (first Chicago and then Pittsburgh). On the E30 forums, the general conclusion is that with cars that have never seen salt, are relatively easy to do, while any significant salt exposure can lead to one HORRIBLE job. We fiddled around for nearly 3 days before figuring out how to get them out. I can provide more details if anyone is interested. The fundamental issue is a bad design by BMW: the inner "sleeve" of the bushing is aluminum, while the cavity in the body that the bushing sleeve presses into is steel. When these cars were built, no grease was used when pressing the bushings into the body. Steel + Aluminum+ Salt led to serious galvanic corrosion, where essentially the bushing is "welded" to the body.

Last edited by ptbowman; 12-19-2015 at 05:49 PM.
ptbowman is offline   Reply With Quote
Old 09-29-2016, 06:52 PM   #12
bazar01
Senior Member
 
bazar01's Avatar
 
Join Date: Aug 2009
Location: Georgia
Posts: 595
iTrader: (0)
Default

Quote:
Originally Posted by ptbowman View Post
Rear subframe mounts:
The biggest challenge we had was that the OEM subframe bushings were absolutely corroded into the body due to 27 years and 150,000 miles of driving in salty environments (first Chicago and then Pittsburgh). On the E30 forums, the general conclusion is that with cars that have never seen salt, are relatively easy to do, while any significant salt exposure can lead to one HORRIBLE job. We fiddled around for nearly 3 days before figuring out how to get them out. I can provide more details if anyone is interested. The fundamental issue is a bad design by BMW: the inner "sleeve" of the bushing is aluminum, while the cavity in the body that the bushing sleeve presses into is steel. When these cars were built, no grease was used when pressing the bushings into the body. Steel + Aluminum+ Salt led to serious galvanic corrosion, where essentially the bushing is "welded" to the body.
ptbowman, I know this is an old post, but can you share how you got the original aluminum sleeve off the steel stud on the rear subframe?

Did you have to spray a lot of PB Blaster to get it unstuck? Did you heat it up with a propane torch?
Let me know if you don't mind.
__________________
1996 Ti 280k miles and still going....
1993 964 - holding on to this one
2001 Burban, 240k miles
2018 Suburban Z71
bazar01 is offline   Reply With Quote
Old 09-29-2016, 06:57 PM   #13
ZEK
Senior Member
 
ZEK's Avatar
 
Join Date: Jul 2009
Location: US
Posts: 315
Vehicles
iTrader: (0)
Default

Heat and air hammer worked for mine. Not as stuck but worked

Sent from my MotoG3 using Tapatalk
__________________
98 318Ti S52
84 318i M10 Zender
93 325is Parker
ZEK is offline   Reply With Quote
Old 09-30-2016, 11:22 PM   #14
ptbowman
Junior Member
 
Join Date: Dec 2015
Location: Pittsburgh
Posts: 13
Vehicles
iTrader: (0)
Default

Quote:
Originally Posted by bazar01 View Post
ptbowman, I know this is an old post, but can you share how you got the original aluminum sleeve off the steel stud on the rear subframe? Did you have to spray a lot of PB Blaster to get it unstuck? Did you heat it up with a propane torch? Let me know if you don't mind.
It was a PAIN!!!! I have worked on cars for decades- biggest pig of a job I have ever seen. I tried do many different things that just didn't work. Lots of penetrating oil (even stuff better than PB Blaster) did not work. There is just no good way to get the fluid in thst aluminum/steel interface. Finally I went crazy with a drill. First I drilled multiple holes around the circumference of the rubber bushing in order to separate that from the inner aluminum sleeve. I then carefully cut away the rubber bits from the aluminum sleeve. I was hoping to grab the aluminum sleeve with a giant visegrip hoping that torque would break the corrosion. Nope! So finally I bought a series of drill bits and very carefully enlarged the center hole in the aluminum sleeve until it was thin enough that it literally fell out of the body. My sons and I were whooping and hollering and high-fiving because we had been fighting this for days- my wife came running to the garage thinking someone was hurt! We did not use a torch because I was really concerned about the gas tank being so close to everything and the last thing I wanted was a gasoline explosion especially in a garage integral to the house. We could have probably rigged some heat shields but I just didn't want a hot flame within inches of a gas tank And fuel lines in adfition, a flame will definitely set the rubber bushing on fire creating a hortible smoky mess. In hindsight I could gave done this in an hour by just drilling out the aluminum sleeve and not messing around with everything else I tried. 20/20 hindsight. BUT be incredibly careful NOT to damage the bushing locating point in the body (the steel sleeve that locates the aluminum sleeve). If you mess up the steel sleeve you'retotally screwed! It wasn't that hard though- the aluminum is soft and the drlll bits cut easily through it. Run a slow drill speed and go slowly, frequently stopping to check your work. No problem on first few bits but that last where you have thinned the aluminum sleeve enough that it loses all strength- BE CAREFUL

Last edited by ptbowman; 09-30-2016 at 11:27 PM.
ptbowman is offline   Reply With Quote
Reply

Bookmarks

Tags
bushings , differential , suspension , trailing arms


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Knocks in the rear hatch area on rough road surfaces bazar01 Exterior 1 03-11-2014 05:06 PM
Removing rear Differential bushing Ralliart10 Transmission 2 06-06-2013 06:34 AM
Polyurethane bushing thread Platanos Suspension 15 07-07-2011 01:46 AM
Inside wear on rear tire. suggestions? UberWagen Suspension 8 12-14-2009 11:19 PM
Ireland Engineering Urethane Rear subframe/Trailing Arm Bushings Viper3812 US and North America 5 11-04-2009 02:16 PM


All times are GMT +1. The time now is 11:46 AM.


.
Powered by site supporters
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org
© vBadvanced CMPS v3.2.2
[page compression: 130.34 k/153.94 k (15.33%)]

318ti.org does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information or products discussed.