Tie rod replacement?

[Xenocide]

I still can't figure out my steering wheel vibration.

Picked up some new control arms with meyle ball joints and new tie rods. Anyone have a how-to on the tie rods? I have the tie rod puller but haven't looked yet a how to do it...

Control arms are very straight forward though.

[b.u.ti-ful]

I don't know much about steering, but it might help to know what you have done so far and under what conditions you get the vibration.

[the governor]

I had my brother an ASC certified mechanic help with my tie rod ends. If your unfamiliar I suggest you take it to a shop, beside you'll need an alignment right away.

[Xenocide]

I plan on doing an alignment anyways.

I have a vibration at highway speeds, steering wheel goes from side to side just enough to annoy me.

I have done in this order:

New tires, balanced twice.
bilstein struts and shocks
new pads & rotors all around.
alignment

[b.u.ti-ful]

Sounds like you are on the right track.

http://www.pelicanparts.com/bmw/tech...eplacement.htm

[Xenocide]

Originally Posted by b.u.ti-ful

Sounds like you are on the right track.

http://www.pelicanparts.com/bmw/tech...eplacement.htm

?? thats not tie rods....I can easily do the control arms.

[b.u.ti-ful]

Sorry - here it is

http://www.pelicanparts.com/BMW/tech...t-Overhaul.htm