I was replacing all the 6 brake hoses on my 1996 yesterday and it was going very smoothly until the very last one on the rear gave me a hard time.
It was the one inside the driver side rear. The hex head got rounded even with the right 11mm fitting wrench and PB blaster. It was rusted out. I ended up not replacing this hose. The hose is hard and cracking.
The rounded fitting goes to the hard line mounted on the driver side trailing arm. I cannot seem to find the part number for the hard line from Pelican. Can somebody assist with the part number. Thanks.
__________________ 1996 Ti 280k miles and still going.... 1993 964 - holding on to this one 2001 Burban, 240k miles 2018 Suburban Z71