Anyone Mesh out their Non M3 front bumper cover?

[writeb]

Hey,
Has anyone meshed out their front bumper cover? And do you have any pics of what this looks like? I pulled the bumper last week to install fogs and saw that installing mesh in it's place wouldnt be too difficult a job.

I'm considering meshing out the grille and installing a painted lip extention/ and or splitter eg.
http://i13.ebayimg.com/01/i/01/0e/2c/4d_1.JPG
http://i10.ebayimg.com/02/i/01/0d/c9/88_1.JPG
http://i23.ebayimg.com/02/i/01/0e/04/c6_1.JPG

M3 spoiler it's not, but I prefer the M5 look spoiler anyways. Advice solicited.

Thx

writeb

[grail]

if you look at my album,the lower grill is meshed.did it with a friend a few months, couldn't have done it without help.
i wanted to put steel ones but they were difficult to fit.so, i just put the aluminium one.we didn't put the the mesh inside the bumper but outside; folded and inserted were the original mesh was.since the the bumper is curved it was a bit difficult to follow it but managed eventually.
we'll be doing at some point with my friend's ti as well.

got a lip spoiler as well,to go with the color of the mesh.

[grail]

better pic in my gallery.

[Shay]

Hi im pretty new to forums etc... and really want to know how i would go about looking at your pics in your gallery??? I looked on your site but no car pics. Can ya help me out???
Shay.

[2ndBimmer]

Click 'Album' up on the top by the pic of the red Ti in the left corner.