Camshaft Position Sensor Yeah; I had a random CEL with the code for the camshaft sensor. I reset it and continued to drive then about a week later after changing the oil the car would not start, no code but I guessed it was the sensor. Got one from the dealer and replaced it car started right and has been running fine ever since. Ingore sensor codes at your own peril, the cost of sensor is about the same as the tow to get somwhere to fix it. Cheaper to replace and be safe. The computer compares the position of the camshaft to the crankshaft using the sensor outputs. Last edited by AquaCali; 04-27-2010 at 06:22 PM. Reason: add-on |