help cam sensor

[trikzta]

so the cam sensor code came up and well i changed both camshaft and crankshaft post sensor, reset the CEL and it came back i thought if i would change both it would be fixed so now what?

[trikzta]

anyone?

[AquaCali]

Hom many miles on the car? I can think of several possible issues;
1. Bad connection, where the camshaft connects under the manifold. clean and check.
2. bad sensor = weak signal, would not rule it out.

3. worn/jumped cam chain, check camshaft alignment vs TDC

I believe that the computer is comparing the position of the camshaft to the position of the crankshaft. I had to replace the camshaft sensor on mine last year, car would not start at all with the bad sensor. Good Luck

[trikzta]

well dude i just replaced both sensors with brand new ones.. and the code popped back up.. them being new i saw no reason in why to clean them.. as in for camshaft alignment vs TDC i have no clue what that means