hi guys so there has been talk about reproducing the OEM mudflaps due to the fact that they are no longer available and impossible to find.
continued from this thread -->
http://www.318ti.org/forum/showthread.php?t=30849 luckily i have a complete set of flaps and i am in the manufacturing industry so this is something that i can do. For now i will start on the 1996 and up M/sport mudflaps then move forward to the other variations.
Also, I might take out the BMW in the rear just to be safe on trademark laws
I spoke to my contacts on abs plastics and it is very doable.
There will be a minimum of 20 sets though for production to be considered.
If we get 20 commitments then we can make this happen.
As far as pricing goes, we are still negotiating on that. But the target is close to OEM pricing.
So far we have 3 that is already interested. If you want to join the group buy please post
List:
1. E36 TI-M
2. BlackBMWs
3. Coyoteh
4. Sito
5. DaRvDrUmS
6. BRADESTAR
7. diegokiill / BMW_Hatchback
8. CASTRO
Pics for reference:
Feeler: Reproduction Mudflaps 
Threaded Mode