Throttle Bearing Replacement

[SmokeE]

Hi i am new to this forum and i am just hoping someone could help me out. I have a 95 318 ti. i have done some aftermarket work to it. (intake, exhaust, HIDs, blackouts, short shift, injectors) for about a week now it has been makin a sound when i push the clutch in. it is an airy hollow sound when i push the clutch in. it is the throttle bearing going out. I was just wondering if anyone had any info about replacing the throttle bearing. what needs to be done, is it possible to do it without a lift? i can get to a lift if it is needed. please help me with any info yall can.. thank u.

[Xenocide]

throw out bearing.

Either that or your clutch pedal bushings.

If it is your throw out bearing you have to remove the transmission and might as well put a new clutch in at the same time.

[pdxmotorhead]

If the noise only happens as the pedal is moving its the pedal bushing, (Very common E36 problem) if its a continuous noise when the pedal is in but stops when the pedal is out its the throwout bearing... And likely time for a clutch as mentioned above.

Dave

[SmokeE]

it happens continously when i have the clutch pushed in.. and only stops when i release the clutch..

[SmokeE]

alright i guess im gonna have to replace the clutch more money out my pocket. anyone have any recommendations for a good clutch?

[DataTraveler]

off topic...
you mentioned injectors above.
aftermarket injectors? or just replaced OE?

[SmokeE]

i believe there 550cc injectors.. id have to check with my uncle to make sure.. im still kind of a noob to tuning.. tryin to learn what i can.