» Site Navigation | | » Recent Threads | | | ![](http://www.318ti.org/forum/clear.gif) | ![Reply](http://www.318ti.org/forum/images/buttons/reply.gif) | ![Share/Bookmark](http://static.addtoany.com/buttons/share_save_171_16.png) | | 11-24-2005, 02:26 AM | #1 | Senior Member Join Date: May 2004 Posts: 411 | EVERYTHING needed for a swap s52 swap OBD2 to OBD2 m3 components needed -engine ~5000 -cluster ~250 -radiator ~150 -80c thermostat -ecu, and complete (matching to engine, and transmission )wiring harness ~250 or included -EWS(security system) to be aligned by dealership ~100 -Custom Intake ~100+ -Complete m3 exhaust up to muffler, which does not fit ~300 -e46 330 OEM or aftermarket muffler, or custom muffler that fits (magnaflow) ~150+ optional but recommended -transmission ~450 -m3 clutch and flywheel ~100 or included -mcoupe or mroadster LSD differential ~500 -matching driveshaft to differential ~150 -front m3 brakes, preferably with complete front brakes ~700 -17" + wheels to clear m3 brakes, if you went this route. Preferably wider then 8" -m3 alternator ~75 - Please feel free to add, I might have left something out. I got tired of people asking, and us telling to search, when there is no definative thread According Dredder, but make sure your number of bolts match 6 or 4 on both ends: 1. 318ti tranny use 318ti driveshaft 2. m3 tranny uses m3 drive shaft 3. Mroadster tranny use mroadster driveshaft. Total required labor should be around $2500, or $3500 with all optional installed A wheel tire combo that does NOT give enough traction after this mod is 17X7.5" with Yokohama es100 tires 215 wide. First and second gear can lose traction. 17x9" wheels with 255-40-17 performance tires does fit all around, with 15mm spacers up front, and fender rolling in rear. This provides good dry traction. | | | 11-24-2005, 08:23 AM | #2 | Senior Member Join Date: May 2004 Posts: 411 | EWS -what I've learned there are 3 points with EWS, each has a code which must match the other 2. Otherwise car won't start. -key -ews box, located under glove box, about 4" by 2" by 3" -computer, ecu The best route is to go to the dealership, BEFORE trying to crank it, or even messing with it. I found that having people try to line up the EWS with inferior tools more then 1 time causes permanent damage to the ews box, which then no longer can be aligned. Then your new route is to get a key, ignition lock, ews box, and ecu, from a working and running car ~$450 | | | 11-24-2005, 01:37 PM | #3 | Senior Member Join Date: Jan 2005 Location: Portland, Oregon Posts: 484 | another option is get EWS delete chip from AA/TMS/Etc. Additional parts needed/option; 80C thermostat water wetter fluid Make sure the wiring harness is for the same ///M motor & same year, (thier are atleast 4 different wiring harness). If you try to install an Auto harness to Manual car, you're going to have a headache. __________________ ![](image.php?s=8be42412689df0bede62d5f27c47dd20&u=1311&type=sigpic&dateline=1168019577) S50 Swap, Euro 3.5" HFM (MAF), my custom Chip, Cosmo CAI, Custom Exhaust, 6 Cyl. Gauge cluster, 80C thermostat, E46 330 Front Brakes, Powder coated Calipers, Clear Corners, Black Grill, UUC SSK, M3 Front Strut, M3 Front Springs, Powder Coated Valve Cover, ZR3 Laser. and some | | | 11-24-2005, 10:54 PM | #4 | Senior Member Join Date: May 2004 Posts: 411 | Quote: Originally Posted by Dredder another option is get EWS delete chip from AA/TMS/Etc. Additional parts needed/option; 80C thermostat water wetter fluid Make sure the wiring harness is for the same ///M motor & same year, (thier are atleast 4 different wiring harness). If you try to install an Auto harness to Manual car, you're going to have a headache. | You can't get a chip for an OBD2 setup. Water wetter fluid is for fan delete riught? | | | 11-24-2005, 11:00 PM | #5 | aka Stabby Join Date: Nov 2004 Location: Mead, CO Posts: 5,336 | water wetter can be used anywhere, it just lowers the overall temp from what i understand. basic cooling system protection. __________________ 1996 318ti, California package, 267k miles current mods: bilstein sports, bavauto springs, e30 m3 LCABs, solid metal ball joints, bavauto RSMs w/reinforcements, e30 3.73 LSD & halfshafts, supersprint cat-back exhaust, turner rear sway bar reinforcements, IE poly subframe & RTABs + camber/toe kits, powdercoated e36 32x front calipers, sport mirrors, H&R 28mmF/19mmR sway bars, x-brace, auto solutions SSK w/poly bushing upgrade, BMW CD43 head unit, DICE HD Radio w/iPod integration and "stealth" HD antenna, staggered style 68s, orange electronic TPMS, leather arm rest, JT Designs metal undertray acquired and awaiting install: heated seat kit, cali top switch relo, lumbar support kit, park distance control kit, heated washer nozzle kit, m-coupe rear subframe, trailing arms, differential, and halfshafts, m-coupe front/rear brakes with master cylinder, under hood light kit, mud flaps, rear sun blind, auto-dimming rear view mirror, tilt steering wheel retrofit, apexcone 5000K HIDs with 55W ballasts ![](image.php?s=8be42412689df0bede62d5f27c47dd20&u=1131&type=sigpic&dateline=1197516154) 2002 X5 4.4 Sport Package, 53.5k miles Current Mods: e46 m3 steering wheel | | | 11-25-2005, 05:40 AM | #6 | Senior Member Join Date: Jun 2003 Location: Saint Paul, MN Posts: 3,244 | Quote: Originally Posted by Silver00spike I got tired of people asking, and us telling to search, when there is no definative thread. | Halleljah my brother! and thank you. __________________ My Former Rides 1999 318ti Alpine White, Cali Roof, Dinan goodies 1996 318ti Hellrot California Edition | | | 11-25-2005, 04:24 PM | #7 | Senior Member Join Date: Aug 2005 Location: Iasi, Romania Posts: 101 | But what if I whant to swap to an m50 engine? What are all the parts that I need? All I know is that I only need the engine , wireing harnes and all the engine electronics,cluster and 325 front brakes(preferebly e46 330 brakes) and I can use my curent gear box, drive shaft, diff and front m-tehnik suspention (wich I just changed a week ago). | | | 11-25-2005, 04:37 PM | #8 | aka Stabby Join Date: Nov 2004 Location: Mead, CO Posts: 5,336 | one thing i was never sure on ... what driveshafts work with which combinations of transmissions/differentials? for example, what driveshaft works in the following situations: 1) original transmission and differential ---> original ti driveshaft 2) M3 transmission, ti differential ---> ? 3) M3 transmission, MZ3 or M-Coupe differential ---> ? i'm guessing those are the general situations people find themselves in. __________________ 1996 318ti, California package, 267k miles current mods: bilstein sports, bavauto springs, e30 m3 LCABs, solid metal ball joints, bavauto RSMs w/reinforcements, e30 3.73 LSD & halfshafts, supersprint cat-back exhaust, turner rear sway bar reinforcements, IE poly subframe & RTABs + camber/toe kits, powdercoated e36 32x front calipers, sport mirrors, H&R 28mmF/19mmR sway bars, x-brace, auto solutions SSK w/poly bushing upgrade, BMW CD43 head unit, DICE HD Radio w/iPod integration and "stealth" HD antenna, staggered style 68s, orange electronic TPMS, leather arm rest, JT Designs metal undertray acquired and awaiting install: heated seat kit, cali top switch relo, lumbar support kit, park distance control kit, heated washer nozzle kit, m-coupe rear subframe, trailing arms, differential, and halfshafts, m-coupe front/rear brakes with master cylinder, under hood light kit, mud flaps, rear sun blind, auto-dimming rear view mirror, tilt steering wheel retrofit, apexcone 5000K HIDs with 55W ballasts ![](image.php?s=8be42412689df0bede62d5f27c47dd20&u=1131&type=sigpic&dateline=1197516154) 2002 X5 4.4 Sport Package, 53.5k miles Current Mods: e46 m3 steering wheel | | | 11-26-2005, 12:10 AM | #9 | Senior Member Join Date: May 2004 Posts: 411 | Quote: Originally Posted by cali-ti one thing i was never sure on ... what driveshafts work with which combinations of transmissions/differentials? for example, what driveshaft works in the following situations: 1) original transmission and differential ---> original ti driveshaft 2) M3 transmission, ti differential ---> ? 3) M3 transmission, MZ3 or M-Coupe differential ---> ? i'm guessing those are the general situations people find themselves in. | I wish I could help you with this, or the guy with the m50 swap, but I'm just speaking from experience. I'm using the e36 m3 driveshaft, but it was machined to fit the differential. Reason being one is 4 bolts, the other is 6. What you need to do it find a driveshaft that has the same number of bolts as your differential's flange(connection point) | | | 11-26-2005, 11:47 PM | #10 | Senior Member Join Date: Jan 2005 Location: Portland, Oregon Posts: 484 | Heres my response in regards to the driveshaft question. 1. 318ti tranny use 318ti driveshaft 2. m3 tranny use m3 drive shaft 3. Mroadster tranny use mroadster driveshaft. I bought J!M swap manual and from my recollection those were his instructions. __________________ ![](image.php?s=8be42412689df0bede62d5f27c47dd20&u=1311&type=sigpic&dateline=1168019577) S50 Swap, Euro 3.5" HFM (MAF), my custom Chip, Cosmo CAI, Custom Exhaust, 6 Cyl. Gauge cluster, 80C thermostat, E46 330 Front Brakes, Powder coated Calipers, Clear Corners, Black Grill, UUC SSK, M3 Front Strut, M3 Front Springs, Powder Coated Valve Cover, ZR3 Laser. and some | | | 11-26-2005, 11:55 PM | #11 | aka Stabby Join Date: Nov 2004 Location: Mead, CO Posts: 5,336 | Quote: Originally Posted by Dredder Heres my response in regards to the driveshaft question. 1. 318ti tranny use 318ti driveshaft 2. m3 tranny use m3 drive shaft 3. Mroadster tranny use mroadster driveshaft. I bought J!M swap manual and from my recollection those were his instructions. | cool. are the LENGTHS of all the driveshafts what they need to be? that's one thing i wasn't sure about. i understand silver00spikes's comments regarding the bolt pattern at the diff end of the driveshaft, just wasn't positive on the lengths of the driveshafts. are the mroadster trans and the m3 trans any different? from what silver00spike said on the diff, the front mount is different between the m3 (6-bolt) and the m-roadster (4-bolt), but i would be surprised to learn that the transmissions are different. again, from what i recollect, the m3 trans is LONGER than the ti trans (and therefore the 325/328 trans as well), right? keep in mind, i'm just trying to clarify this to the best of all our understandings for those who wish to do it in the future, i'm not actually going to do it myself ![Smile](http://www.318ti.org/forum/images/smilies/icon_smile.gif) this is certainly a much discussed topic and i applaud silver00spike for starting this thead! __________________ 1996 318ti, California package, 267k miles current mods: bilstein sports, bavauto springs, e30 m3 LCABs, solid metal ball joints, bavauto RSMs w/reinforcements, e30 3.73 LSD & halfshafts, supersprint cat-back exhaust, turner rear sway bar reinforcements, IE poly subframe & RTABs + camber/toe kits, powdercoated e36 32x front calipers, sport mirrors, H&R 28mmF/19mmR sway bars, x-brace, auto solutions SSK w/poly bushing upgrade, BMW CD43 head unit, DICE HD Radio w/iPod integration and "stealth" HD antenna, staggered style 68s, orange electronic TPMS, leather arm rest, JT Designs metal undertray acquired and awaiting install: heated seat kit, cali top switch relo, lumbar support kit, park distance control kit, heated washer nozzle kit, m-coupe rear subframe, trailing arms, differential, and halfshafts, m-coupe front/rear brakes with master cylinder, under hood light kit, mud flaps, rear sun blind, auto-dimming rear view mirror, tilt steering wheel retrofit, apexcone 5000K HIDs with 55W ballasts ![](image.php?s=8be42412689df0bede62d5f27c47dd20&u=1131&type=sigpic&dateline=1197516154) 2002 X5 4.4 Sport Package, 53.5k miles Current Mods: e46 m3 steering wheel | | | 11-28-2005, 03:18 AM | #12 | Senior Member Join Date: Jan 2005 Location: Portland, Oregon Posts: 484 | 325 and 318ti uses the getrag tranny while 328 and m3 uses ZF tranny __________________ ![](image.php?s=8be42412689df0bede62d5f27c47dd20&u=1311&type=sigpic&dateline=1168019577) S50 Swap, Euro 3.5" HFM (MAF), my custom Chip, Cosmo CAI, Custom Exhaust, 6 Cyl. Gauge cluster, 80C thermostat, E46 330 Front Brakes, Powder coated Calipers, Clear Corners, Black Grill, UUC SSK, M3 Front Strut, M3 Front Springs, Powder Coated Valve Cover, ZR3 Laser. and some | | | 11-29-2005, 08:35 AM | #13 | Senior Member Join Date: May 2004 Posts: 411 | I would say you DEFINATELY need a stronger diff, cause I broke my old one with just a blower and some canny shifting | | | 11-29-2005, 10:05 PM | #14 | Senior Member Join Date: Dec 2004 Location: Muncie, Indiana Posts: 1,551 | Could someone post up what is needed for the OBD-I to OBD-I S50 swap? I heard there were a few differences, and the M42-S50 was a little easier/cheaper. The swap is looking better everyday ![Rolleyes](http://www.318ti.org/forum/images/smilies/rolleyes.gif) cough KO major let down dissapointment scam cough. Now that I am working as a classical guitar instructor at a music academy I may be able to do it in a year or something. | | | 11-30-2005, 02:14 PM | #15 | Senior Member Join Date: Jan 2005 Location: Portland, Oregon Posts: 484 | Quote: Originally Posted by AlaskaBlue Could someone post up what is needed for the OBD-I to OBD-I S50 swap? I heard there were a few differences, and the M42-S50 was a little easier/cheaper. The swap is looking better everyday ![Rolleyes](http://www.318ti.org/forum/images/smilies/rolleyes.gif) cough KO major let down dissapointment scam cough. Now that I am working as a classical guitar instructor at a music academy I may be able to do it in a year or something. | You are right the S50 OBD1 to OBD1 is the simplest of all swap. That is what i have in my car. Word of advice when you get a donor make sure you also get the same wiring harness from the car. You are going to pull on your hair trying to figure out the whole mess. Everything is a direct bolt in __________________ ![](image.php?s=8be42412689df0bede62d5f27c47dd20&u=1311&type=sigpic&dateline=1168019577) S50 Swap, Euro 3.5" HFM (MAF), my custom Chip, Cosmo CAI, Custom Exhaust, 6 Cyl. Gauge cluster, 80C thermostat, E46 330 Front Brakes, Powder coated Calipers, Clear Corners, Black Grill, UUC SSK, M3 Front Strut, M3 Front Springs, Powder Coated Valve Cover, ZR3 Laser. and some | | | ![Reply](http://www.318ti.org/forum/images/buttons/reply.gif) | | Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | | Posting Rules | You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is Off | | | |