Front Plate Mount.

[cjm1219]

I ordered the wrong front plate mount from pelican http://www.pelicanparts.com/cgi-bin/...%20318ti%09%20

I forgot the the M-Tech Bumper would be different.
This looks to be the right part. Can anyone confirm? http://www.pelicanparts.com/cgi-bin/...C%20Each%20%20


It looks like the standard molding piece but with two holes in it to access the threaded screw holes underneath. Is this correct? If so can I just drill out the part I have? Then if I ever end up back in a state w/o front plates I can just order the a new standard molding without holes.

Any info would be appreciated.

Thanks

[tiFreak]

http://www.bavauto.com/fland.asp?par...3%20FTLP%20KIT

this is what you need, those two holes aren't spaced correctly for a plate, they're just for the bracket. you could always just put a couple self tapping screws in to the molding, it's how I have my euro plate on

[Budget M3]

Originally Posted by tiFreak

you could always just put a couple self tapping screws in to the molding, it's how I have my euro plate on

+1