1995 318ti M42 with blown head gasket I am swapping out a the M42 in my father in law's 318ti and now have an extra long block that has a blown head gasket. It was high mileage (262K), but still ran fine until he overheated it. It was pressurizing the cooling system, so I don't think coolant got into the oil. It still turns freely. I will sell whole or parts depending on what people need. The whole long block can be picked up in my garage for $100. If you need specific parts off of it, let me know. All manifolds and most of the sensors are up for grabs. I am in the metro Cincinnati, Ohio area and wanted to check to see if anyone wanted any of the parts before I scrap it. Just to be clear, this is for the long block only. It is from a 1995 318ti. Last edited by douggla; 10-08-2012 at 08:12 PM. |