I had mine apart several times. No need to remove the TB, just unhook all the hoses attached to it and move it aside. You don't need to remove the throttle and cruise control cables, just the rubber hoses and electrical connections and bolts then swing it out of the way. Remember where everything goes, or tag everything you disconnect. After you clean the ICV a couple of times, you get the hang of it. I reused the gasket everytime. Its a pretty tough one and should be fine. __________________ SOLD!!! 1999 332ti //M Sport Titanium Silver M3 S52 3.2 I-6 Engine, M3 Clutch w/ ti Getrag Trans, Z3 3.15 LSD medium case diff and half shafts, OEM Hatch Spoiler, Eurosport HP Underdrive Pulleys, FDM, 17" DS1 rims, M3 Front Struts & Springs, M3 Instrument Cluster, 3-spoke //M steering wheel with tri-color stitching, SSK, CCFL Angels in Depo projectors with 5k HIDs |