My 318ti project

[Fagerheim]

So, this is my 318ti project atm... please leave some tip, reply or any sugestions =)
Back for more progress! Got a new jobb to pay for the upcoming modds!

Next to do:
Install new rear breaks, Install the DTM lip, remove all rust on the car (found a bit to much),

Pictures is a bit blury, cause im takeing them with my phonecam...

My english aint to good, hope you understand =)

* = Done while beeing member of this site

Things iv done:
-Changed front grill to black style late E36 / E46 lookalike
-Changed front bumper to Rieger Infinity II
-Changed Headligt to Hella Crome Projector headligths
-Installed Xenon 8000k to the low beam light (dunno what its called in english)
-Changed old floor mats to E46 floor mats
-Fixed rear light to do double brake lights
-Changed OEM whipers to Silence nometal whipers...
*-Changed high beams to Xenon 8000k
*-Buy new rear side windows and tint em, also mounted em
*-Finished the rear end of my car...
*-Bumpers painted at Paint workshop
*-Add grills and clear foglighs with bluevision bulbs to my front bumper
*-Add grills to my rear bumper
*-Add plasma light into the instrument gauge / speedo / RPM
*-Apply my rear bumper to the car
*-Painted My dash trim
*-Change muffler to dual 3,5" square muffler (not finished yet, have to reconstruct the rear part of my exhoust) pictures to come...
*-Added grill behind the main grill
*-Added a bit tint to the front window (pictures to come)
*-Installed new MOMO steering wheel hub and "sports/raceing" steering wheel with blue stitches to match the interior color.
*-Installed m3 mirrors (Theyr not painted jet...)
*-Installed new Gear knob
*-Installed new fogligths (pictures comin)
*-Changed the cam shaft position sensor (old one didnt work)
*-Installed Audio / power wireing for amp and speakers...
*-Installed a 6-channel amp 4x75Watt RMS + 1x600Watt RMS
*-Installed a 12" multimagnet subwoofer, 800Watt RMS 1600Watt MAX...
*-Installed a Sony Xplod CDX-GT60U cd-player...
*-Buy 18" rims (black gloss with 2/2,5" Polished Lip) **THESE HAS BEEN INSTALLED NOW*
*-Installing 40\30 lowering springs, or install fully coilover kit.. (Il have to install bilstein or koni shocks as the car aint stiff enough)
*-Installed Rear Enforced shock Guide supports
*-Installed Rear Rubber Mountings
*-Installed Rear Stabilizer links
*-Bent the inside of the rear fenders as my 8,5" wide rims will fit
*-Installed New rear bumper
*-Rewelded the exaust to fit 100% with the new bumper


Things im gonna do:
-Buy paint and mount m-tech moldings around the car
-Buy black a-b-c pillars
-Buy black interior roof.
-Buys new locks and handles both sides.
-Mount the Centerforce dual-friction clutch that I just got from Summit Racing =)
-New 4% header tint in front windshield
-Buy and install rear windshield spoiler!
-Change front indicator ligts to clear ones... or simply buy new haedlights w/ indicators thats black inside with projector and halos...
-Change rear light to clear ones with indicator light, then get em tinted at Paint Workshop.
-Remove the cat... (maby change it with a full flow silencer to silence the exhoust sound a bit, think it got a bit to loud with the muffler)
-Repaint the whole car in a same color, maby a bit lighter... (also remove rust and such)...
-Tint front side windows 43%
-Tint rear window 23%
-Mount the Rieger Infinity II DTM lip for the frontbumper
-Buy and install Carbon Fibre emblems for hood, hatch...
-Install Carbon Fibre Hood
-Change the pedals
-Buy and install aftermarket Sport seats
-Buy and install new front speakers and rear speakers
-New LSD! (from z3 m coupe? or any good E30 LSD)

turbo kit (shopping list):

*Since this is my daily driver im going to start buying parts, and install em when I have everything I need.

Garret GT3071R Turbo:
OBX turbomanifoil w/ downpipe
550cc injectors
GS preformance Wg
Oil drain kit
Oilpipeing kit
HKS BOV w/ pipe
Vi-Pec Engine Management
Intercooler kit
Magnecor ignition cables and NGK iridium sparkpluggs
Forged Arrow Rods w/ arp studs
Turbocamshafts (not found any good yet)
Forged CP pistons with 1:8,5 compression
Rod crank brearings
Rod piston bearings
Valve train kit
Cylinderhead gasket top
MLS cylinderhead bottom gasket w/ apr studs
Valve seal rings
Vac high preformance valve springs

Gauges:

Boost gauge (bar)
Oilepressure gauge (bar)
Oiletemp måler (C)
AFR gauge


I was thinking on running 20-25psi boost.

Il go take som new pictures as soon as possible!

**Will add pictures as soon as I'v done something new!**

Would be great with some feedback =)

Look at my GALLERY to see more pictures of the project.