318ti.org forum

Go Back   318ti.org forum > Technical, Maintenance and Modifications > Transmission

Notices

Transmission Automatic, manual and shift lever discussions.

.
» Recent Threads
1999 M-Sport For Sale
12-31-2023 05:10 PM
Last post by Coop540iT
03-23-2024 06:39 PM
1 Replies, 96,918 Views
Once again 318ti owner...
03-20-2024 12:39 PM
Last post by two30grain
03-22-2024 02:04 PM
1 Replies, 59,890 Views
What brakes do I...
03-20-2024 03:27 PM
Last post by huirtera
03-20-2024 03:27 PM
0 Replies, 57,301 Views
M50+manual swap bastard...
03-01-2024 11:00 PM
Last post by Andy318
03-18-2024 02:34 PM
3 Replies, 132,405 Views
  Share/Bookmark
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-18-2020, 11:56 PM   #1
KASZ
Junior Member
 
Join Date: Dec 2018
Location: IL
Posts: 16
iTrader: (0)
Default Cant shift into gear/ Master clutch cylinder?

Hey all, I am scratching me head over here.

So I started my car after having it sit for a while during the lockdown. I depress the clutch and start it. Runs fine, everything is good. I try to shift into gear... and i cant. Engine bogs down a bit but just cant get it into gear.

I turn off the car. and the stick goes into every position smoothly without a hitch. So i pump my clutch a bit, and I cant remember but it think it felt softer. still no luck. Car moves in gears forward and reverse fine, because i got it up on ramps right now. But in the sequence of car off, shift, car on, move. car off, shift and so on.

So i ordered both a master and a slave. So far I replaced the slave. Got it on, and i cant bleed the damn thing. No fluid is coming out at all. I used a brake bleeder to suck the air through the valve. Not going at all. Pumped the clutch, nothing, no fluid is going down. Even pumped the slave and undid the valve simultaneously, still no fluid coming out.

My guess is there is something up with the master, that's not allowing for suction. Clutch pedal has no resistance now at all. no pressure at all. Thoughts?
KASZ is offline   Reply With Quote
 

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
My Manual Transmission Swap! CirrusSR22 Transmission 58 11-05-2013 09:53 AM
FS: Clutch Master Cylinder + Extras CirrusSR22 US and North America 0 07-24-2009 03:30 AM
1st gear trouble cev12 Transmission 6 10-31-2007 09:59 PM
M3 Clutch and Flywheel Without Master Cylinder GDB Transmission 2 12-20-2004 01:09 AM
M3 Clutch and Master Cylinder fourbanger Transmission 9 07-14-2003 04:28 PM


All times are GMT +1. The time now is 01:25 PM.


.
Powered by site supporters
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org
© vBadvanced CMPS v3.2.2
[page compression: 108.42 k/116.99 k (7.33%)]

318ti.org does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information or products discussed.