Passenger fender turn signal not working

[showaski]

Hi everyone,

The passenger side turn signal on the fender isn't working. All the other turn signals work (including the one on the driver side fender). I've tried replacing the bulb, but this didn't help. All the fuses for the turn signals appear to be OK. Plus, if it were a fuse, you'd think that more than one signal wouldn't be working.

Does anyone have any suggestions?

Thanks!

[740isport]

Check the wiring connection to the signal assembly. There is a couple of places within the fender where the wire's can become chaffed, cut and/or broken and cause your problem.

[msport318ti]

Neither one of my turn signals are working and neither is my hazards. Any thoughts?

[msport318ti]

Neither one of my turn signals work. The passenger is blown up front but fine in the rear. Also my hazard lights won't come on. Is it a fuse or wiring problem?

[740isport]

Are you saying none of your turn signals or hazards are working? Then check your fuses first, then the flashers. But if you are meaning the side lights behind the front tires on the fenders are not working, but the rest of the signals are, then they are probably disconnected.

[msport318ti]

My turn signals and hazards aren't working at all. I haven't checked the side markers behind the tires. They worked fine earlier today, but when I left work and put my turn signal on I got nothing.

[740isport]

Then probably a fuse or flasher.