I don't have the 318ti.org sticker, but here are some general directions for applying vinyl stickers. 1. Clean the area that you want to apply the sticker. 2. Wipe the area with alcohol to help remove any oil or residue. 3. Peal the first backing of the sticker and place it how you want it. 4. Then apply pressure and squeeze out any air bubbles. 5. Slowly peel back the second backing, pushing/peeling off any pieces that stick to it. 6. Squeeze out any remaining bubbles and ensure that everything is adhering properly, particularly at the corners and ends to help prevent peeling. That's pretty much it. Simple. __________________ moku 1996 318ti Cali Top w/ Downing/Atlanta Supercharger 2003 M3 w/ CSL trunk, splitters, & diffuser |