EWS-II Delete chip wiring

[nicsop13]

I have a 95 318ti that wont start I think i trouble shot it to the Ews-ii system it started to only start once in awhile then not at all. At that point I cut the two large wires on the Ews-ii system and jumped them together. That made the starter work but the engine would still not fire up. I recently sent my chip to midnight tuning solutions. I now have 2 different ews off chips for my car. i tried them both tonight with the wires still jumped together and the one chip sounded like it wanted to fire but then it stopped. I need help with the wiring aspect. there are plenty of different opinions out there. Can someone Please help me. The car has not been started for a month now. Barrie told me my software on the chip was one he had not seen before. But it was legit and that one of the two chips he sent me should work. I now believe its something in the wiring. Any One that has experience with this i would love some help

[Rami93]

In have this same exact problem. Did you ever figure it out? Can you delete the ewsii just by umping the starter wires and a chip?

[alika808]

Originally Posted by Rami93

In have this same exact problem. Did you ever figure it out? Can you delete the ewsii just by umping the starter wires and a chip?

Hey Rami93, since that thread was too old, could you explain or put in detail what's wrong with you car, such as what kind of troubleshooting you did, etc. There are a lot of us maybe can help you to figure-out. Thank you.

[nicsop13]

As long as you're positive it is the ewsii system you can delete the system using an ews delete chip from barry at midnighttuningsolutions.com. it cost 100 bucks and he sent 2 chips in case one didnt work. I cant remember if I left the wires jumped or not but barry should be able to tell you that. It took about a week to get the chip as he is in canada. He is totally trust worthy and worth the money. All other solutions were well over 700 bucks.

[nicsop13]

After reading my original post i remembered that my battery wasnt charged after charging the battery and installing the chip it fired right up

[Rami93]

I already talked to him, he said there's no way to bypass the ews ii because I have a 668 dme. I'm just going to get a simulator because that seems like the cheapest solution

[xxxJohnBoyxxx]

Please post back on this thread if you install the simulator and get it working. I wondered about how the simulator worked for a while now