So here is the latest. I have the new angel eyes & the HID low beams wired up & working.
What does not work is the high beam and I am completely stumped. I have verified that I have power at the harness and in fact all the way to the bulb. I have verified the bulb is good and that the fuses are ok.
What I don't get is that there are only 2 wires. A brown (ground from what I have online) and white. The white goes to the back of the (H1) bulb and the brown to the high beam (reflector) housing. It all seems so simple, yet no light
Any thoughts on what I am missing?