Door speakers

[1996 318ti NY]

Hey, my door speakers were left disconnected by the PO. I went to take the panels off and theres a cross over in the door i believe, but the connection on the speaker is a 3 prong connector its a male plug, and there are just 2 tabs coming off of this cross over looking thing. Does anyone have an idea where to get this or how i can wire them up without the connectors?

Any help here would be appreciated i just want to get my door speakers working.

[Ji Money]

So each door has two speakers on your model right? That's how mine is and if nothing is broken with the speaker wires then it should just snap in. So are the tips on the wires broken then?

[anthony318ti]

Do you have any pictures? I have two speakers as-well, two connectors one for tweeter and one for midrange.

[1996 318ti NY]

Single speaker in each door. The Problem was that there were 3 prong connectors on the speakers that the previous owner didnt reinstall, so basically i had to figure out which 2 were for the speaker, and i did i broke the connector pieces off the speakers and fabricated new ones to connect the speakers back too the crossover and bam! done now it sounds MUCH better.

Thanks

[anthony318ti]

Originally Posted by 1996 318ti NY

Single speaker in each door. The Problem was that there were 3 prong connectors on the speakers that the previous owner didnt reinstall, so basically i had to figure out which 2 were for the speaker, and i did i broke the connector pieces off the speakers and fabricated new ones to connect the speakers back too the crossover and bam! done now it sounds MUCH better.

Thanks

Well done. Any possibility of posting pictures would be nice to see your door speaker setup!

[slow_ti]

I did a completely custom job on my speakers. Pretty much all mine were blown. Light weight shallow speakers is the way to go. I'll post pics tomorrow


Sent from my iPhone using Tapatalk