Auto m52b28us harness in 1998 TI? so i have a 1998 TI [originally Manual] with a m52b28us in it and it basically all ready to go but i feel like the m52 auto harness pinout might be different? i have my original key, EWSII module, and a ms41.2 with the ews disable. i went out today to crank it and it did, but i was noticing the fuel pump wasnt priming. i know my fuel pump is good when i apply direct 12v, but at the connector with the car on, there is no voltage. I even tried jumping 87 and 30 at the relay but i get no priming. at this point im pulling my hair and i really hope someone here has the knowledge i need.... all in all any help would be greatly appreciated |